Cichlid Fish Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,106 Posts
Tanks can be drilled for overflows on any pane of glass whether it be the bottom/sides/front/back. The easiest/cheapest way to seal a hole from an overflow is to use a bulkhead and put a plug in the bulkhead. But that doesn't mean that is how they did it they could have used weld-on or other acrylic glue and put a piece of acrylic over the spot where the hole was. The only way to know for certain is to go look at it like everyone else has said.

Depending on how they sealed the hole will depend on how you can go about using a wet/dry. You don't have to have a drilled tank to use a wet/dry it just makes it easier.

Keep us posted.
 
1 - 1 of 1 Posts
Top