Cichlid Fish Forum banner
1 - 1 of 3 Posts

· Registered
Joined
·
1,394 Posts
Long as the drylok & paint is dry and cured then those are safe. I usually let them sit for about 24-48hrs just to make sure its fully cured up. When you install it with silicone then you'll want to let that off gas for about 2-3 days. After that I usually fill with water and then drain and refill, but that's just mostly to get any debris/bits of foam or anything off more than to remove any chemicals. Water is cheap and doesn't hurt to do one initial full WC just to be on the safe side. That's all though, no need for extended soaking or multiple wc's or anything of that nature.
 
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top