Cichlid Fish Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
87 Posts
Discussion Starter · #1 ·
I currently have two cycled tanks running. A 55G Mbuna tank with 18 large juveniles. Tank went through a fishless cycle about 3 months ago. I also have a 20G emergency tank I did a fishless cycle on about 2 months ago with 8 Barbs keeping it company. The 55G has a wet/dry with two trays of bio balls and a separate chamber for the sump pump. The 20G has a Fluval C3 with a small sponge filter. All of these are cycles and well established. In preparation for the subject of my question I recently added about a gallon of bio balls to the pump area of the 55G wet/dry. I also added a large sponge filter to the 20G tank.

Now, I am about to set up a 125G Tropheus tank. This will have a 30G aquarium sump filter. There are two chambers before the last chamber that will house a mag drive return pump. I can put about anything in the first two chambers. I have tons of lime rock and coral rock for filtration and/or decoration. I would like to do a fishless cycle on the 125G tank as quickly as possible using the seeding I have available. Any suggestions on how to use what I have on hand would be welcomed. I do not want to totally move the 55G wet/dry.

Thanks for any suggestions!
 

·
Registered
Joined
·
87 Posts
Discussion Starter · #4 ·
Thanks guys. How about this. A handful of established bio balls, exchange a few rocks from the 55G to the 125G and put the small sponge filter (the one that's more seasoned) in the 125G sump? The 55G has a rock wall but the 125G will have a rock pile on each end and maybe some structure in the middle. BTW - I am not running powerheads on the sponge filters but do have them hooked up to air.
 
1 - 2 of 2 Posts
Top