Cichlid Fish Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
509 Posts
Discussion Starter · #1 ·
What are the actual dimensions? Online it says 16"x16" on the base but I'm thinking that includes the motor.

What is the diameter of the big tub? If it is 12" it would fit. If it is 16" no dice.
 

·
Registered
Joined
·
1,657 Posts
I just went and measured. There are 4 handles on the tub which seems to be the widest point (on top). From outside of handle to outside of handle is about 14 1/2". It's hard to measure the base in my cabinet and running but the diameter on tub on the bottom is 11 1/2" and the motor sticks out about 4" on the one side. So my calculations is 15 1/2". Maybe they rounded up to 16"? Hope this helps you out.
 

·
Registered
Joined
·
509 Posts
Discussion Starter · #3 ·
Yes, thank you very much.

The online dimensions say 16x16 and that just didn't make sense given the motor position on the bottom.
 

·
Registered
Joined
·
1,512 Posts
I could have sworn I measured mine at 17" across.
 
1 - 4 of 4 Posts
Top