Cichlid Fish Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
46 Posts
parkayandbutter said:
28mm, 38mm, and a 45mm bulkhead fit a 1/2", 3/4" and 1" bulkhead?
Did you mean 28mm, 38mm, and a 45mm holesaw fit a 1/2", 3/4" and 1" bulkhead?

If so that should be about right... I used a 38mm holesaw for 1" and 3/4" bulkheads and it fits fine.

Best thing though would be to buy the bulkheads then measure up from them what size holesaw you need.
 
1 - 3 of 3 Posts
Top