Cichlid Fish Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
319 Posts
You have a sound design there. That same design would support a 150 gallon no problem. There are two things I would change if this were my stand: Add a sheet of plywood to the top (to help keep assembly square and rigid) and leave out the center braces ( they just add weight and are not necessary. Use very dry lumber for this project to avoid shrinkage issues. Preferably something that has been kiln dried and stored indoors for a while.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top