Cichlid Fish Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
50 Posts
I have a similar set up - 3 33's with a sump on the bottom. The problem I have run into is the the output from the pump is not a loop so the amount of water getting to the top tank is far less then the bottom tanks. I have tried closing values to limit the flow to the bottom tanks, but it seems to be too little flow then. Also on the drain side a few times I have had an over flow of the tank closest to the sump.

So use 2" pipe for the drain side and 3/4 for the feed side and make the feed side a loop to try and keep the prusser to each tank the same
 
1 - 1 of 1 Posts
Top