Cichlid Fish Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
3,148 Posts
Stack them in the 4 corners... put thick (I suggest 3/4") plywood across the blocks... on this application I would use styrafoam (personally I'd put a thin piece both under and over the plywood, inexpensive overkill protection is a good thing).
 

· Registered
Joined
·
3,148 Posts
Stack them in the 4 corners... put thick (I suggest 3/4") plywood across the blocks... on this application I would use styrafoam (personally I'd put a thin piece both under and over the plywood, inexpensive overkill protection is a good thing).

To make it look nicer simply throw a piece of cloth over it...
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top