For general questions and issues. Post here if you are unsure of their origin or if you have questions about mixing.
Thu Dec 20, 2018 5:20 pm
I recently noticed that my tab water has 1-2PPM Ammonia in it. I know that's pretty high which makes the water changes complicated..
I tested with API test-kit that's not expired and pretty new. Does anyone else have same issue out there? I called my water company and waiting to hear back. What's the best way about going to change 25%-50% WC? Ammonia in tank currently at 0.10PPM or less but not 0. Please advise on how to handle this issue.... I use Prime when doing water changes.
Thu Dec 20, 2018 8:41 pm
Prime should neutralize it in the tank until your water company can fix it. Drink/cook with bottled water meanwhile I'm thinking.
Thu Dec 20, 2018 11:18 pm
I had the same problem with ammonia and nitrites. I double dosed prime until the water company fixed the problem.
Fri Dec 21, 2018 8:26 am
If your water company is using chloramine to disinfect the water, it is going to have some ammonia in it. Use a good quality water conditioner like SeaChem Prime or Safe. Both products remove ammonia as well as chlorine/chloramine. They will also bind nitrite and nitrate making them less toxic.
Fri Dec 21, 2018 11:28 am
I think the test results for "normal" tap water with chloramines is .25 PPM. If there is 1PPM or more I would call the water company.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.