Equipment & Supplies • Too much filtration?

For discussion regarding filters, lights, heaters, pumps, etc.

Moderators: Deeda, Kanorin

Too much filtration?

Postby Charden » Fri Nov 08, 2019 9:15 pm

Going to be running an all male Hap/Peacock 125 gallon tank. I was thinking of using a Fluval FX6 and a Fluval FX4. Is this a little overkill?
Charden
 
Joined: Tue Apr 12, 2011 6:59 pm
Location: Tennessee

Share On:

Share on Facebook Facebook Share on Twitter Twitter

Re: Too much filtration?

Postby Deeda » Sat Nov 09, 2019 12:00 am

I don't think it is too much filtration, do you already have the filters or are you thinking of buying them?
Fishless Cycling
Posting Pics Eff. June 20, 2017, Photobucket does not allow free pic hosting

Dee
Eheim filter user
Member since 3/7/2006
Deeda
 
Joined: Wed Jan 04, 2017 6:56 pm
Location: Medina, OH

Re: Too much filtration?

Postby Charden » Sat Nov 09, 2019 12:03 am

putting my purchase list together
Charden
 
Joined: Tue Apr 12, 2011 6:59 pm
Location: Tennessee

Re: Too much filtration?

Postby Deeda » Sat Nov 09, 2019 12:28 am

When I had my 125G set up for Malawi peacocks I was using an FX5 and an Eheim 2260 and was satisfied with the amount of filtration and the flow. I am not really a big fan of the FX output nozzles but eventually got them positioned the way I wanted them. Eventually switched the tank over to Tanganyika cichlids and kept the same filters on and they did just fine.

Are you buying a premade stand or building your own? Check to be sure there is enough clearance to easily remove the canister filters through the doors and there is enough height to fit the filter inside the stand without kinking the hoses.
Fishless Cycling
Posting Pics Eff. June 20, 2017, Photobucket does not allow free pic hosting

Dee
Eheim filter user
Member since 3/7/2006
Deeda
 
Joined: Wed Jan 04, 2017 6:56 pm
Location: Medina, OH

Re: Too much filtration?

Postby Charden » Sat Nov 09, 2019 10:26 am

I'm sure it will be a premade stand. I had a 125 before that I had a FX5 in so I will most likely go with a stand like that.
Charden
 
Joined: Tue Apr 12, 2011 6:59 pm
Location: Tennessee

Re: Too much filtration?

Postby Ichthys » Sat Nov 09, 2019 11:04 am

Depends how you have the flow. There’s no such thing as too much filtration but you can have a current too strong for the fish.
Ichthys
 
Joined: Thu Apr 21, 2016 7:41 am
Location: UK

Re: Too much filtration?

Postby Charden » Sat Nov 09, 2019 12:44 pm

Ichthys wrote:Depends how you have the flow. There’s no such thing as too much filtration but you can have a current too strong for the fish.


That's what I am really afraid of. My other option was a HOB for mechanical and the fx6 for bio and chemical with 2 Hydor Koralias.
Charden
 
Joined: Tue Apr 12, 2011 6:59 pm
Location: Tennessee

Re: Too much filtration?

Postby Ichthys » Sat Nov 09, 2019 12:52 pm

If it’s too much you can point one of them towards the glass, or into the corner...
Ichthys
 
Joined: Thu Apr 21, 2016 7:41 am
Location: UK

Re: Too much filtration?

Postby Charden » Sat Nov 09, 2019 6:17 pm

So what I am thinking is using the FX6 as the biological filter and the FX4 as the Mechanical/chemical filter. Maybe something like this, or open for ideas:

FX6 bottom-top
Basket 1- ChemiPure Elite Bag x2
Basket 2- Biomax
Basket 3- Biomax
Basket 4- Polishing Pad and foam

FX4
Basket 1- ZeoCarb
Basket 2- Biomax-polishing Pad
Charden
 
Joined: Tue Apr 12, 2011 6:59 pm
Location: Tennessee

Re: Too much filtration?

Postby Deeda » Sat Nov 09, 2019 6:32 pm

Honestly I would just set them up the same to do both mechanical and bio and fit any chemical media you want in either or both filters. I've never used polishing media in my FX5 as it clogs too quickly.
Fishless Cycling
Posting Pics Eff. June 20, 2017, Photobucket does not allow free pic hosting

Dee
Eheim filter user
Member since 3/7/2006
Deeda
 
Joined: Wed Jan 04, 2017 6:56 pm
Location: Medina, OH

Re: Too much filtration?

Postby Ichthys » Sat Nov 09, 2019 9:53 pm

I would also set them up the same. Porous media need to be kept very clean or they’ll be no better than non-porous.
Ichthys
 
Joined: Thu Apr 21, 2016 7:41 am
Location: UK


Return to Equipment & Supplies

Who is online

Users browsing this forum: No registered users and 6 guests